Shelly 1PM temperature add-on and graph resolution in Shelly Cloud app

    • Autor

    I have simple setup with Shelly 1PM and temperature add-on to measure leaving water temperature for floor heating. Everything works perfectly, temperature is presented in real time within Shelly Cloud android application but history and graph below are in 1-hour resolution. Meaning if on 14:05h temperature is 31C and in 14:55h is 25,5C and in 15:00h is 34C, graph will show only 34C. 31C and 25,5C will not be visible on graph at all and it will not be visible in downloaded CSV file. This is not acceptable for me.

    Is there any setting and how to achieve that temperature (with history) is visible maximum on 1 minute basis?

    Thanks.

    Hi Stile,

    great question. i have the same question and on the internet i can't find any answers. is there someone who can help us out on this. if it would not be possible within the shelly / cloud environment / app, can someone explain to us how we could do this using other techniques. (MQTT, JSON, URL other application, domoticz, etc...)

    I would like to build a dashboard with graphs to show my 4 temperature measurements (shelly 1PM with addon) with an interval of example 1 minute.

    any thoughts are welcome.