Shelly 1 receive input from Shelly i3

Zitat von Flavio21

Hello,

I have a problem here that I'm not able to solve.

I have installed a Shelly 1 in a gate, it works perfectly.

I decided to install a Shelly i3 and have configured 2 pushbutton inputs.

I configured the action with "http://192.168.1.204/relay/0?turn=on&timer=1", in Shelly i3.

If putting the link in the browser works perfectly, but I can't put it to trigger the Shelly 1.

What am I missing?

Alles anzeigen

Hi,

• I got the same issue: the i3 is a momentary switch, and the short press url is http://192.168.1.232/relay/0?turn=toggle (232 is the shelly 2.5). Using the same from a shelly1 works flawless, with the i3 just random. As it worked before FW upgrade I even downgraded the FW, but it does not make it better, also the factory reset did nothing. As there is a new Firmware for the i3 out i flashed it, but no difference. for me it seems that there is some "power saving" active (what makes no sense on a permant powerd actor), as the webpage loading after some downtime is quite slow and the time is not updated. Mayby there is some WiFi stuff, but I did not change anything there. My advice is to leave it as is, and wait for new firmware, or try a dfifferent WiFi AP (Unifi is the currant) - thats what I will try next week. Will report back.