Overconsumption device switch off

    • Autor

    Hello

    I'm new on the shelly side and after configure on my mobile phone it was working very well
    and I was very happy

    Although the shelly 1 PM was bought specifically to monitor the solar panel production .

    I made the upgrade of the firmware for version 1.11.2 and suddenly I get Overconsumption and shelly power off .

    I went through the options and I tried to untick the power off function for 3500W.

    Thinking that I get solved the problem I get after sometime the same problem.

    Overconsumption although no thick its present and I get all this situation .

    I research for the issue and I see that some people has downgraded the firmware but I tried and success to do the same .

    But problem persist at this moment I get version 1.10.4 and same problem.

    Is there anyway of not getting power off , another shelly , another option that I might failed ?

    Image in attach

    • Autor

    After the upgrade it works fine but still gets the same situation

    everytime they pass 3500 w I get shelly to be poweroff

    Is it possible to change this number ?

    I have the same issue with a Shelly 1PM attached to my solar pane inverter output. The max output of the inverter is 3.6kw. It appears the 1PM is sensitive to sudden increases in power throughout. I notice the overconsumption shutdown when it is cloudy and then the sun comes out. On a clear day with the inverter working smoothly there is no problem. It’s strange and I have not been able to rectify the situation. I was considering replacing the 1PM with an EM.

  • Dieses Thema enthält 5 weitere Beiträge, die nur für registrierte Benutzer sichtbar sind.