HTTP-Request Shelly TRV

HTTP-Request with Original-Firmware:

Enter in the address bar of the browser:

Auto Temp Control:

Code

http://192.168.xxx.xxx/settings/thermostat/0/?target_t_enabled=1

ON = 1 , OFF= 0

Auto Temp Control ON and set Target-Temp:

Code

http://192.168.xxx.xxx/settings/thermostat/0?target_t_enabled=1&target_t=10

Target-Temp. 4-31 degree

Auto Temp Control OFF and set Valve-Position:

Code

http://192.168.xxx.xxx/thermostat/0?pos=10

Valve-Position in percent 0-100 (%)

Switch Schedule ON/OFF:

Code

http://192.168.xxx.xxx/settings/thermostat/0?schedule=0

ON = 1 , OFF= 0

Switch Schedule ON/OFF and set Schedule Profil 1-5:

Code

http://192.168.xxx.xxx/settings/thermostat/0?schedule=1&schedule_profile=1

ON = 1 , OFF= 0

Profil = 1-5

Boost Start in Min:

Code

http://192.168.xxx.xxx/thermostat/0?boost_minutes=10

Switch Accelerated heating (reduce time to reach the target temperature):

Code

http://192.168.xxx.xxx/settings/thermostat/0/?accelerated_heating=0

ON = 1 , OFF= 0

Set minimum position of valve in percent:

Code

http://192.168.xxx.xxx/settings/thermostat/0?valve_min_percent=0

Valve-Position in percent 0-10 (%)

Set Display brightness:

Code

http://192.168.xxx.xxx/settings/?display_brightness=1

1=Low, 4=Normal, 7=High

Display Rotate screen (180°):

Code

http://192.168.xxx.xxx/settings/?display_flipped=1

ON = 1 , OFF= 0

Child Lock:

Code

http://192.168.xxx.xxx/settings/?child_lock=1

ON = 1 , OFF= 0

Calibration:

Code

http://192.168.xxx.xxx/calibrate

Change timer profiles:

Code

http://192.168.XXX.XXX/settings/thermostats/0?schedule_profile=1&schedule_rules=0830-0123456-18.5,1030-0123456-20.5

(Thanks Devil )

schedule_profile: the profile number 1 (linvingroom)

schedule_rules: each entry must be separated by a comma

Each block can be seen here separately separated by the hyphen/minus (-) (0830-0123456-20.5)

First block (0830): Time hour and minute written together, note leading zero in example 08:30

Second block (0123456):

0 = Monday

1 = Tuesday

2 = Wednesday

3 = Thursday

4 = Friday

5 = Saturday

6 = Sunday

in the example Monday - Sunday

Third and last block (18.5): The desired temperature in the example 18.5°C

The IP address must of course be adapted to the home network and the respective Shelly device.

Teilen