HTTP-Request Shelly MOTION

HTTP-Request with Original-Firmware:

Changing the values in the Shelly MOTION main menu.

Enter in the address bar of the browser:

ILLIMINATION DEFINITIONS - DARK

Code

http://192.168.xxx.xxx/settings?dark_threshold=100

ILLIMINATION DEFINITIONS - TWILIGHT

Code

http://192.168.XXX.XXX/settings?twilight_threshold=500

MOTION SENSITIVITY - value: 1 - 256

Code

http://192.168.xxx.xxx/settings?motion_sensitivity=10

MOTION BLIND TIME - value: 1 - 1440

Code

http://192.168.xxx.xxx/settings?motion_blind_time_minutes=1

MOTION PULSE COUNT - value: 1 - 4

Code

http://192.168.xxx.xxx/settings?motion_pulse_count=1

MOTION DETECTION OPERATING MODE - Mode: 0 - 3

Code

http://192.168.xxx.xxx/settings?motion_operating_mode=1

0 - ANY
1 - DARK
2 - TWILIGHT
3 - BRIGHT

TAMPER ALARM SENSITIVITY - value: 0 - 127

Code

http://192.168.xxx.xxx/settings?tamper_sensitivity=15

MOTION SENSOR enable:

Code

http://192.168.xxx.xxx/settings?motion_enable=true

MOTION SENSOR disable:

Code

http://192.168.xxx.xxx/settings?motion_enable=false

MOTION SLEEP TIME - value: 0 - 86400 (Seconds)

Code

http://192.168.xxx.xxx/settings?sleep_time=0

Actions enable/disable:

URL: MOTION DETECTED: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=motion_on

URL: MOTION DETECTED: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=motion_on

URL: MOTION DETECTED IN DARK: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=motion_dark

URL: MOTION DETECTED IN DARK: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=motion_dark

URL: MOTION DETECTED IN TWILIGHT: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=motion_twilight

URL: MOTION DETECTED IN TWILIGHT: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=motion_twilight

URL: MOTION DETECTED IN BRIGHT: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=motion_bright

URL: MOTION DETECTED IN BRIGHT: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=motion_bright

URL: END OF MOTION DETECTED: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=motion_off

URL: END OF MOTION DETECTED: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=motion_off

URL: TAMPER ALARM DETECTED: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=tamper_alarm_on

URL: TAMPER ALARM DETECTED: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=tamper_alarm_on

URL: END OF TAMPER ALARM: enable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=true&name=tamper_alarm_off

URL: END OF TAMPER ALARM: disable

Code

http://192.168.xxx.xxx/settings/actions?index=0&enabled=false&name=tamper_alarm_off

Weekly schedule:

Weekly schedule enable:

Code

http://192.168.xxx.xxx/settings?schedule=true

Weekly schedule disable:

Code

http://192.168.xxx.xxx/settings?schedule=false

LED LIGHTS CONTROL

Sensor-LED disable:

Code

http://192.168.xxx.xxx/settings?led_status_disable=true

Sensor-LED enable:

Code

http://192.168.xxx.xxx/settings?led_status_disable=false

If an authorization is required:

extend with respective setting type with value:

Code

http://user:pass@192.168.xxx.xxx/settings?...

user: user name to adjust
pass: password to adjust

The IP address must of course be adapted to the home network and the respective Shelly device.

Teilen