HTTP-Request Shelly Dimmer/2

  • HTTP-Request Shelly Dimmer

    HTTP-Request with Original-Firmware:

    Enter in the address bar of the browser:

    • switch ShellyDimmer ON:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?turn=on
    • switch ShellyDimmer OFF:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?turn=off
    • switch ShellyDimmer TOGGLE:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?turn=toggle
    • switch ShellyDimmer ON with Timer in s:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?turn=on&timer=30
    • switch ShellyDimmer OFF with Timer in s:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?turn=off&timer=30
    • switch ShellyDimmer ON and brightness in %:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?turn=on&brightness=70
    • ShellyDimmer set brightness in %:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?brightness=70
    • increase Dimming begin*1 ShellyDimmer: um 30%:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?dim=up&step=30
    • decrease Dimming begin*1 ShellyDimmer: um 20%:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?dim=down&step=20
    • ShellyDimmer dimming stop:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?dim=stop
    • ShellyDimmer dimming cycle *2:

    CODE

    Code
    http://192.168.xxx.xxx/light/0?dim=cycle

    *1 until receive another command

    *2 cycle: Up/Stop/Down/Stop/...


    If an authorization is required:

    • switch ShellyDimmer ON:

    CODE

    Code
    http://user:pass@192.168.xxx.xxx/light/0?turn=on
    • user: user name to adjust
    • pass: password to adjust


    The IP address must of course be adapted to the home network and the respective Shelly device.

Teilen