HTTP-Request with Original-Firmware:
Enter in the address bar of the browser:
- switch ShellyEM Relay ON: http://192.168.xxx.xxx/relay/0?turn=on
- switch ShellyEM Relay OFF: http://192.168.xxx.xxx/relay/0?turn=off
- switch ShellyEM Relay ON with Timer in s: http://192.168.0.50/color/0?turn=on&white=20
- switch ShellyEM Relay OFF with Timer in s: http://192.168.0.50/color/0?turn=on&white=20
If an authorization is required:
- switch ShellyEM Relay ON: http://user:pass@192.168.xxx.xxx/relay/0?turn=on
- user: user name to adjust
- pass: password to adjust
Retrieve and save measurement data: ( RSp, thanks for the tip!)
Read out the current values and the summed values of channel 0: http://192.168.xxx.xxx/emeter/0/em_data
Read out the current values and the summed values of channel 1: http://192.168.xxx.xxx/emeter/1/em_data
Call up the csv file from channel 0 as a download for saving on the local computer: http://192.168.178.176/emeter/0/em_data.csv
Call up the csv file from channel 1 as a download for saving on the local computer: http://192.168.178.176/emeter/0/em_data.csv
The IP address must of course be adapted to the home network and the respective Shelly device.